Knife-shaped Key Holder - my3DPM
  Contact Us

Knife-shaped Key Holder






There are two versions of the key holder.

The first version is for up to nine keys and the second version is for up to five keys.

Parts for version one :

1x key holder_1.stl , 1 x key holder_2.stl , 2x standoff_9 keys.stl , 1x locking disc_9 keys.stl , 1x keychain.stl and spacer.stl to prevent the rattle if less than nine keys are installed (For example 2 spacer if you only have seven keys). 3x M3x20 countersink screw (DIN 965) , 3x M3 locknut , 1x M3 washer. Parts for version two :

1x key holder_1.stl , 1 x key holder_2.stl , 2x standoff_5 keys.stl , 1x locking disc_5 keys.stl , 1x keychain.stl and spacer.stl if needed (For example 2 spacer if you only have seven keys). 3x M3x14 countersink screw (DIN 965) , 3x M3 locknut , 1x M3 washer. The part key holder_1.stl needs support. I printed key holder_1.stl and key holder_2.stl with HDglass from Formfutura and 0,175 Layer height, for the standoff and the locking disc I used ApolloX from from Formfutura but you can also use ABS.

Filename
Downloads
cc2d78bf65a528d694f89edd3b728c3b_key holder_2.stl
1
79171ac86364a8464dca5433b36524c9_key holder_1.stl
1
20531c932fc5848859df7348cc9f0f60_keychain.stl
1
a686b800e3dce0d56d1e541a991dedd2_locking disc_5 keys.stl
1
f3dd94270f355d2b802c0fb2b1465f5f_locking disc_9 keys.stl
1
1dcaf310e6c6d363fe8e51627add35f7_spacer.stl
1
c74b754ff1c02ebb524acaae550c134d_standoff_5 keys.stl
1
ab04bdf495a4fb2c92be29821e9eeea8_standoff_9 keys.stl
1

Designs by Badrul Hafiz